Welcome to UK Parts Direct... As we hope you may have noticed, we have a very personal approach in how we service your business. We really do care about our Customer Service and will always go the extra mile to help...
We don't just supply the very best quality ABS parts in rapid time, we also offer you Free Expert Advice to resolve ABS problems with your vehicle and save you stacks of money in the process. Don't replace a driveshaft etc until you have spoken to us.
We are saving each of our customers up to £2000 per vehicle daily!
We were the very first company to start developing ABS Reluctor Rings, just over 10 Years ago, in co-operation with our Manufacturing Partner in Germany.
We are proud to now offer you our very own uniquely formulated pd ABS Ring retainer - a high strength ABS Retainer specifically developed for the bonding of ABS Reluctor Rings. Designed to augment the strength of interference fit between an ABS Ring and Driveshaft. In addition, locks out corrosion of assembled parts by creating a solid anti-corrosion barrier.
© ukpartsdirect - Descriptions, Part numbers, Photos and Illustrations shown are trademarks and/or copyrights of UK Parts Direct Ltd / The Pit Stop and use without express written permission of the owners is punishable by law.
**PLEASE NOTE - Our pd ABS Ring Retainer Fluid is supplied FREE OF CHARGE with all of our pd ABS Reluctor Rings & ABS Kits - SAVING YOU £9.99
- EXCLUSIVE pd ABS OUTLET
- BACKED BY 50 YEARS+ BRAKING EXPERIENCE + FREE PHONE & EMAIL SUPPORT
**SAFETY CRITICAL** Always MUST be used when mounting ABS Reluctor Rings
- FREE UK Express Delivery - GET IT FAST
- HIGH STRENGTH EXCLUSIVE ABS Ring Bonding Retainer - developed by us!
- Exclusively formulated to lock pd ABS Reluctor Rings to Driveshafts
- Complete, Cost Effective & Permanent Solution
- 100% LOCKS OUT FUTURE CORROSION
- Oil and Grease Tolerant
- Easy To Apply Nozzle
- Free Expert Support from our UK based engineers
© ukpartsdirect - Descriptions, Part numbers, Photos and Illustrations shown are trademarks and/or copyrights of UK Parts Direct Ltd / The Pit Stop and use without express written permission of the owners is punishable by law.
pd ABS RING & KIT FITTING GUIDE
Approx Fitting Time: 60-90 Minutes
- Remove old ABS Sensor.
- Clean ABS Sensor Tube thoroughly.
- Generally there is no need to remove the driveshaft fully from the vehicle, this process can be achieved in situ.
- Firstly, you need to remove the old ABS Ring from the Driveshaft / CV Joint by drifting off.
- Clean the Driveshaft / CV Joint using a wire brush / emery cloth to remove ALL loose corrosion. DO NOT grind / file or clearance will be lost.
- Apply some pd ABS Ring Retaining Compound to Driveshaft / CV Joint. (supplied FREE OF CHARGE with all of our ABS Rings & ABS Kits)
- Drift the new ABS Ring into position.
- Allow to cure (approx 10 Mins).
- Re-assemble using new Hub Nut. (supplied FREE OF CHARGE with most of our ABS Kits)
- Fit new ABS Sensor. (supplied with our ABS Kits)
Approx Fitting Time: 60-90 Minutes
- Remove old ABS Sensor.
- Clean ABS Sensor Tube thoroughly.
- Generally there is no need to remove the driveshaft fully from the vehicle, this process can be achieved in situ.
- Firstly, you need to remove the old ABS Ring from the Driveshaft / CV Joint by drifting off.
- Clean the Driveshaft / CV Joint using a wire brush / emery cloth to remove ALL loose corrosion. DO NOT grind / file or clearance will be lost.
- Apply heat to the ABS Ring to allow it to expand (placing in the oven or the use of a heat gun is sufficient).
- Apply some Retaining Compound to Driveshaft / CV Joint. (supplied FREE OF CHARGE with all of our ABS Rings & ABS Kits)
- Using suitable heat-resistant gloves, position the new ABS Ring and drift into place.
- Allow to cool and cure (approx 10 Mins).
- Re-assemble using new Hub Nut. (supplied FREE OF CHARGE with most of our ABS Kits)
- Fit new ABS Sensor. (supplied with our ABS Kits)
Approx Fitting Time: 60-90 Minutes **DO NOT expose ABS Ring to strong magnetic fields**
- Remove old ABS Sensor.
- Clean ABS Sensor Tube thoroughly.
- Generally there is no need to remove the driveshaft fully from the vehicle, this process can be achieved in situ.
- Firstly, you need to remove the old ABS Ring from the Driveshaft / CV Joint by drifting off.
- Clean the Driveshaft / CV Joint using a wire brush / emery cloth to remove ALL loose corrosion. DO NOT grind / file or clearance will be lost.
- Apply some Retaining Compound to Driveshaft / CV Joint. (supplied FREE OF CHARGE with all of our ABS Rings & ABS Kits)
- Place new ABS Ring into ABS Fitting Tool (supplied with some of our ABS Kits) and slide over the end of Driveshaft. Using Hub Nut, wind the complete unit into place.
- Once seated, wind back the complete unit and remove.
- Allow to cure (approx 10 Mins).
- Re-assemble using new Hub Nut. (supplied FREE OF CHARGE with most of our ABS Kits)
- Fit new ABS Sensor. (supplied with our ABS Kits)
Approx Fitting Time: 15 Minutes **DO NOT expose ABS Ring to strong magnetic fields**
- Remove old ABS Sensor
- Clean ABS Sensor Tube thorougly
- Remove Brake Drum or Brake Disc from vehicle.
- Firstly, you need to remove the old ABS Ring from the Brake Disc / Brake Drum by drifting off.
- Clean around the mounting position using a wire brush.
- Apply some Retaining Compound around the mounting position. (supplied FREE OF CHARGE with all of our ABS Rings & ABS Kits)
- Drift the new ABS Ring into position using a suitable drift (block of wood etc). DO NOT impact the delicate black area with any sharp / blunt objects).
- Allow to cure (approx 10 Minutes).
- Re-assemble using new Hub Nut. (supplied FREE OF CHARGE with most of our ABS Kits)
- Fit new ABS Sensor. (supplied with our ABS Kits)
DISCLAIMER:
This page has been created as purely a guide based on experience we have developed over the last 10 Plus Years. We accept no responsibility for accuracy of this guide. We also accept no responsibility for any damage or injury caused by following this guide.
1 x 5ml pd ABS Reluctor Ring Retainer
